Diy Fireplace Mantel:A new kind of DIY assembled fireplace.
Diy Fireplace Mantel
A new type of fireplace, a DIY packaged include base plate, two columns and flat, described by fitting the post installation based on both sides of the upper plate, it is described in the set at the top of columns, the cover plate, base plate, column and plate are described as stone plate and honeycomb panel of double-layer composite plates, columns including the lateral plate, the inside of the plate and is former board, described the lateral plate and the inside of the plate is 90 ° vertical plate before stitching is described in both ends fixed and fittings, stitching parts adopt stone plate with composite honeycomb panel or viscous boundary as the transition area.
Further, the outward extension of the stone plate on the two sides of the front plate of the column column is used for splicing the outside plate and the inside plate on the front plate.
Further, the honeycomb panels of the splicing part of the outer and inner panels and the front panels are replaced with stone panels with bonded edges on the honeycomb panels.
Described further, column top by fitting fixed a rung, described the rung above installation decorating plate, decorative described using borehole embedded nut on the back and described the rung through screws, described decorative top cover installation stated, described the rung as stone plate and honeycomb panel of double-layer composite plate, described in the decorative stone plate.
Described further, decorative decorating plate in the left, right, decorative decorating plate and the front and left decorating plate and right described decorating plate is 90 ° vertically mentioned in joining together in a positive and fittings fixed on both ends of the decorative sheet, splice site using stone plate with composite honeycomb panel or viscous boundary as the transition area, the above mentioned in decorative decorating plate, right and left front decorative stitching part of honeycomb panel replaced by stone plate glued on the honeycomb panel.
Further, the honeycomb front side, left side and right side of the base plate are compounded with a layer of stone plate as the closing of the junction.
Further, the front front plate of the column is provided with an upper decorative piece and a lower decorative piece, and the upper decorative piece fits the front front plate and the horizontal plate for installation, and the lower decorative piece fits the front front plate and the base plate for installation.
Described further, stone slab of granite or marble or sandstone, described in the honeycomb panel for aluminum honeycomb composite plate or aluminum composite plate or aluminum composite panels or corrugated board corrugated plate composite board or fiberglass honeycomb composite board or glass fiber composite plate or stainless steel honeycomb composite board or stainless steel corrugated board corrugated plate composite board or galvanized honeycomb composite board or galvanized roofing sheet composite board or plastic honeycomb composite board or plastic composite board, corrugated board, when installation, referred to the outer surface of the stone plate into the fireplace, described the inner surface of the honeycomb panel for the fireplace.
A brief introduction to Diy products above the fireplace:
|Diy Fireplace Mantel|
We offer customization in size, color, and design.
Over 30-year factory experience
Outer in 3cm standard wooden crate, inner in plastic or foam
40-60 days after deposit (15-20days to produce, 25-35days to transport)
High polished or honed
We can take orders according to photo or drawing from you
1.Strict Quality Control and Supervision System Guarantees Good Quality.
Simple pictures of Diy products over the fireplace: